🌍 Exporting to 40+ countries · LHD & RHD conversion in-house WhatsApp +86 199 6378 9330 · info@sigmausedtrucks.com
Truck Review

Hino 500 Series Used Truck Review: Reliable, but Right-Sized?

The Hino 500 series has earned a loyal following across Africa as a tough, sensible medium-duty truck that keeps going. Buyers searching hino trucks for sale know the badge means low drama. This hino 500 series used truck review gives credit where it is due, then draws the honest line: where the 500 is exactly right, and where it is simply too light for the heavy tipper and haulage work many buyers actually need it to do.

Used HOWO cargo truck inspected and ready for CIF export to Africa

What the Hino 500 series is built for

The 500 series is Hino's medium-duty range, sitting above the light 300 and below true heavies. It runs proven Hino diesels in the four- to eight-litre class, built for distribution, rigid bodies, and light-to-medium tipper duty. The appeal is straightforward: it is reliable, economical, and easy to live with, and Hino's parts and service network is genuinely good in many African and Middle-East markets. That support is a real reason buyers keep choosing used hino trucks for sale over less-known names.

Used examples mostly arrive as Japanese exports through the well-known used-Japan import channels, which keeps supply steady and quality predictable. For its intended job — medium loads, regular routes, urban and regional distribution — the 500 is hard to fault.

Buying a used Hino 500: what to check

Japanese-export 500s are usually well-kept, but inspect the basics: frame and body condition, signs of overloading (sagging suspension, cracked chassis around the rear), clutch wear, and rust on coastal-stored units. A hino 500 tipper truck for sale that has spent its life on light building-site duty is a good buy; one that has been hammered carrying overweight aggregate is not, regardless of the badge.

Listings are plentiful — hino tipper truck for sale and hino trucks for sale in south africa both pull long result lists. The catch is that buyers often stretch a medium-duty truck into heavy work because the 500 looks affordable. Before you do that, compare honestly against purpose-built used dump trucks sized for the load.

The honest limitation: it is medium-duty

This is the crux. The Hino 500, including its tipper versions, is a medium-duty truck. For carrying sand, gravel, and aggregate on a serious commercial scale, or for tractor and heavy-haul work, it runs out of axle capacity, power, and chassis strength. People do use a hino dump truck for construction, but if you are moving heavy material all day, you are working the truck at or beyond its design limit — which means accelerated wear, more downtime, and a shorter life.

None of this is a knock on Hino's quality. It is a sizing mistake buyers make. A medium-duty truck doing heavy-duty work will always cost you more per tonne moved than the right tool would. The fix is not a better medium truck; it is a proper heavy.

When you need heavy: HOWO dump trucks

For genuine heavy tipper and haulage work, a Chinese heavy is the cost-effective answer. A howo dump truck in 6x4 dump truck form is built from the ground up to carry the loads that overstress a medium-duty Hino, and it costs less to buy than many used 500 tippers. Where the body needs even more capacity, an 8x4 dump truck steps up again.

The running story is just as strong: simple, often Euro II diesels that any mechanic can fix, and HOWO parts that are the cheapest and most available heavy-truck spares across Africa. As a china used truck exporter we inspect and refurbish each unit, convert LHD/RHD in-house, and ship CIF, so you get the right-sized truck at a clear landed price.

Hino 500 vs Chinese heavy: choosing right

If your work is distribution, medium rigid bodies, or light tipper duty, the Hino 500 is an excellent, dependable choice and its parts network is a genuine advantage. If your work is heavy tipper, aggregate, or haulage, do not stretch the 500 — buy a HOWO or SHACMAN heavy that is designed for the load and costs less to run per tonne.

Match the truck to the job, not the job to the badge. For more on picking and inspecting a tipper, read our used dump truck buying guide.

Hino 500 vs Chinese heavy tipper at a glance

Chinese alternativeHino 500 series
Duty classHeavy-dutyMedium-duty
Heavy tipper capabilityDesigned for itStretched beyond limit
Purchase priceLower for the capacityHigher per tonne moved
Parts cost & availabilityCheapest, widely stockedGood network, pricier
Engine simplicitySimple, often Euro IIReliable, easy to service
Best fitHeavy aggregate & haulageDistribution, light tipper

Indicative comparison; exact spec and price vary by individual unit — contact us for the actual truck on offer.

Frequently Asked Questions

Is the Hino 500 series reliable?
Yes. It is a dependable, economical Japanese medium-duty truck with a good parts and service network across many African and Middle-East markets. For its intended distribution and light tipper work it is hard to beat.
Can a Hino 500 tipper handle heavy construction work?
Only at its limit. The 500 is medium-duty, so continuous heavy aggregate hauling overloads its axles and chassis, causing faster wear and downtime. For serious tipper work a purpose-built heavy is the cheaper choice per tonne.
What should I check on a used Hino 500?
Look for chassis cracks and sagging suspension from overloading, clutch wear, and rust on coastal units. A unit kept on light duty is a good buy; one hammered with overweight loads is not.
What is a better truck than a Hino 500 for heavy tipper work?
A HOWO or SHACMAN 6x4 or 8x4 dump truck is built for heavy loads, costs less to buy for the capacity, and uses cheap, widely available parts. We refurbish and ship them CIF with RHD conversion done in-house.

Tell us the load you actually carry, and we will size the right HOWO or SHACMAN tipper and quote it CIF to your port — inspected and converted.

Reply within 24 hours — or WhatsApp us at +86 199 6378 9330.